LOXEAL - Adhésifs et Produits d'Étanchéité
Adhésifs anaérobies industriels, étanchéité filetage, freinfilet, formeurs de joints et cyanoacrylates LOXEAL.
LOXEAL est un fabricant italien leader en adhésifs et produits d'étanchéité anaérobies pour l'assemblage industriel. Freinfilets, étanchéité filetage, formeurs de joints, adhésifs de fixation et colles instantanées cyanoacrylate.
Les produits LOXEAL polymérisent en l'absence d'air entre surfaces métalliques ajustées, créant des liaisons fiables résistant aux vibrations et aux produits chimiques.
Tous les Produits
Loxeal 18-10 PTFE Thread Sealant 50ml
Anaerobic adhesive for sealing of metal thread pipe joints. PTFE based, low strength, suitable for pipes and fittings.
Loxeal 53-14 Hydraulic Thread Sealant 50ml
Medium strength anaerobic adhesive for sealing hydraulic and pneumatic thread connectors up to 3/4" and small pipes.
Loxeal 58-11 Thread Sealant Medium Strength 50ml
Anaerobic curing adhesive for sealing of metal thread joints. Medium strength formula.
Loxeal 53-14 Hydraulic Thread Sealant 250ml
Medium strength anaerobic adhesive for sealing hydraulic and pneumatic thread connectors up to 3/4" and small pipes. Large 250ml format.
Loxeal 18-10 PTFE Thread Sealant 250ml
Anaerobic adhesive for sealing of metal thread pipe joints. PTFE based, low strength. Large 250ml format.
Loxeal 24-18 Threadlocker General Use 50ml
Low strength anaerobic adhesive for thread locking of nuts, bolts and screws that require easy disassembly. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and chemicals.
Loxeal 55-03 Threadlocker High Temperature 50ml
Medium strength anaerobic adhesive for thread locking of nuts and bolts that require dismantling. Suitable for high temperature applications.
Loxeal 70-14 Threadlocker Penetrating 50ml
Penetrating threadlocker with fast action. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.
Loxeal 58-14 Gasket Maker 75ml (box 10)
Anaerobic gasket maker for metal surfaces. Dispensable from container in bead form onto surfaces to be sealed. Chemical polymerization produces a tough plastic film. Box of 10 units.
Loxeal 58-31 Gasket Maker High Temp 75ml (box 10)
Elastic film, high performance. Anaerobic curing adhesive for gasketing and sealing of flanges. Replaces solid gaskets and gives flexible cured films. High temperature resistance. Box of 10 units.
Loxeal 59-10 Gasket Maker High Temp 100ml
Anaerobic paste-like gasket maker for rigid flanges with large gaps. High temperature resistance.
Loxeal 53-11 Retainer Semi-permanent 50ml (box 10)
Medium strength anaerobic adhesive for retaining bearings, bushings and cylindrical metal parts where disassembly with standard tools is expected. Box of 10 units.
Loxeal 82-33 Retainer High Strength 50ml (box 10)
High strength anaerobic adhesive for metals, highly resistant to oily surfaces. For permanent retention of bearings and cylindrical parts. Box of 10 units.
Loxeal INSTANT 45 General Use 20g (box 10)
Instant adhesive based on ethyl cyanoacrylate. General purpose, medium viscosity. Box of 10 units.
Loxeal INSTANT 14 Metal/Rubber 20g (box 10)
Methyl cyanoacrylate instant adhesive. Medium viscosity, high strength. Recommended for bonding rigid materials such as rubber-metal or metal-plastic. Slow curing allows repositioning. Box of 10 units.
Loxeal INSTANT 17 High Viscosity 20g (box 10)
Methyl cyanoacrylate instant adhesive. High viscosity, high strength. For bonding metal, rigid materials, ceramic, and rubber or plastic to metal. Fills large gaps. Box of 10 units.
Loxeal INSTANT 23 General Use 20g (box 10)
Ethyl cyanoacrylate instant adhesive. Medium viscosity, general use, medium setting speed. For bonding rubber, metal, and plastic parts. Box of 10 units.
Loxeal INSTANT 73 Tough Transparent 20g (box 10)
Ethyl cyanoacrylate adhesive reinforced with tough rubber. Low viscosity. For bonding rubber and metals. Good temperature resistance up to 120C. Box of 10 units.
Questions Fréquentes
Qu'est-ce qu'un adhésif anaérobie ?
Les adhésifs anaérobies polymérisent entre des surfaces métalliques ajustées sans contact avec l'air. Ils restent liquides à l'air libre. Résistance maximale en 24 heures.
Comment choisir la résistance du freinfilet ?
Faible : démontage manuel. Moyenne : la plus courante, démontage avec outils standard. Haute : nécessite de la chaleur, pour assemblages permanents.
Résistance chimique et thermique ?
La majorité résistent aux huiles, carburants, solvants et eau. Standard : -55°C à +150°C. Gamme HT : jusqu'à +230°C.